KI5FUN-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KI5FUN-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	Temp*
1761525492	460 Pkts	450 Pkts	9 C
1761521892	424 Pkts	419 Pkts	9 C
1761518292	433 Pkts	426 Pkts	9 C
1761514691	383 Pkts	377 Pkts	9 C
1761511092	396 Pkts	391 Pkts	9 C
1761507492	356 Pkts	354 Pkts	9 C
1761503892	372 Pkts	365 Pkts	9 C
1761500292	338 Pkts	333 Pkts	7 C
1761496692	419 Pkts	410 Pkts	9 C
1761493092	438 Pkts	433 Pkts	9 C
1761489491	337 Pkts	331 Pkts	8 C
1761478692	344 Pkts	339 Pkts	8 C
1761475092	310 Pkts	305 Pkts	9 C
1761471493	385 Pkts	378 Pkts	9 C
1761467893	394 Pkts	388 Pkts	9 C
1761464293	359 Pkts	355 Pkts	9 C
1761460692	341 Pkts	335 Pkts	9 C
1761457092	367 Pkts	361 Pkts	9 C
1761453492	427 Pkts	423 Pkts	9 C
1761449892	426 Pkts	421 Pkts	9 C
1761446292	403 Pkts	396 Pkts	9 C
1761442692	474 Pkts	466 Pkts	9 C
1761435492	365 Pkts	357 Pkts	9 C
1761431892	415 Pkts	409 Pkts	9 C
1761428292	440 Pkts	435 Pkts	9 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)