This is the latest recevied telemetry packets stored in our database for station/object SA5HXN. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Value1*
Value2*
Value3*
Value4*
Value5*
1784658276
98
1002
0
0
0
1784658246
107
1003
0
0
0
1784658215
109
1006
0
0
0
1784658093
108
1003
0
0
0
1784658062
106
1007
0
0
0
1784658032
111
1008
0
0
0
1784658001
107
1006
0
0
0
1784657971
109
1004
0
0
0
1784657940
112
1008
0
0
0
1784657910
103
1002
0
0
0
1784657879
110
1005
0
0
0
1784657848
111
1007
0
0
0
1784657818
109
1003
0
0
0
1784657787
104
1002
0
0
0
1784657757
111
1003
0
0
0
1784657726
108
1003
0
0
0
1784657696
112
1006
0
0
0
1784657665
113
1005
0
0
0
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)