K3ORB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K3ORB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1780558974	13.13 Volt	520 Pkt	110 Pkt	60 Pcnt
1780558973	13.13 Volt	520 Pkt	110 Pkt	60 Pcnt
1780558706	13.13 Volt	530 Pkt	120 Pkt	61 Pcnt
1780558673	13.13 Volt	530 Pkt	110 Pkt	60 Pcnt
1780558375	13.13 Volt	530 Pkt	120 Pkt	61 Pcnt
1780558374	13.13 Volt	530 Pkt	120 Pkt	61 Pcnt
1780558073	13.13 Volt	520 Pkt	120 Pkt	61 Pcnt
1780557777	13.13 Volt	500 Pkt	120 Pkt	60 Pcnt
1780557774	13.13 Volt	500 Pkt	120 Pkt	60 Pcnt
1780557474	13.13 Volt	500 Pkt	120 Pkt	60 Pcnt
1780557174	13.13 Volt	500 Pkt	120 Pkt	60 Pcnt
1780557173	13.13 Volt	500 Pkt	120 Pkt	60 Pcnt
1780557069	13.13 Volt	500 Pkt	120 Pkt	60 Pcnt
1780556874	13.13 Volt	500 Pkt	110 Pkt	61 Pcnt
1780556575	13.13 Volt	500 Pkt	120 Pkt	60 Pcnt
1780556574	13.13 Volt	500 Pkt	120 Pkt	60 Pcnt
1780556274	13.13 Volt	500 Pkt	120 Pkt	60 Pcnt
1780555674	13.13 Volt	510 Pkt	130 Pkt	62 Pcnt
1780555381	13.13 Volt	510 Pkt	120 Pkt	63 Pcnt
1780555374	13.13 Volt	510 Pkt	120 Pkt	63 Pcnt
1780555074	13.13 Volt	520 Pkt	110 Pkt	64 Pcnt
1780554777	13.13 Volt	510 Pkt	110 Pkt	63 Pcnt
1780554774	13.13 Volt	510 Pkt	110 Pkt	63 Pcnt
1780554473	13.05 Volt	520 Pkt	110 Pkt	63 Pcnt
1780554174	13.13 Volt	520 Pkt	110 Pkt	65 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)