HS8AC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS8AC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1777134954	66 Pkt	0 Pkt	-29 dBm	13.43 V
1777134329	23 Pkt	0 Pkt	-29 dBm	13.49 V
1777133704	29 Pkt	4 Pkt	-29 dBm	13.49 V
1777133080	58 Pkt	0 Pkt	-29 dBm	13.49 V
1777132455	71 Pkt	0 Pkt	-30 dBm	13.43 V
1777131831	23 Pkt	1 Pkt	-30 dBm	13.43 V
1777131204	67 Pkt	0 Pkt	-29 dBm	13.43 V
1777130579	66 Pkt	0 Pkt	-29 dBm	13.49 V
1777129954	36 Pkt	0 Pkt	-30 dBm	13.43 V
1777129330	53 Pkt	0 Pkt	-29 dBm	13.49 V
1777128705	57 Pkt	0 Pkt	-29 dBm	13.49 V
1777128080	79 Pkt	0 Pkt	-30 dBm	13.43 V
1777127453	85 Pkt	1 Pkt	-30 dBm	13.43 V
1777126828	69 Pkt	0 Pkt	-29 dBm	13.49 V
1777126203	40 Pkt	0 Pkt	-29 dBm	13.47 V
1777125579	49 Pkt	0 Pkt	-29 dBm	13.49 V
1777124954	16 Pkt	0 Pkt	-29 dBm	13.49 V
1777124359	16 Pkt	0 Pkt	-29 dBm	13.43 V
1777123705	79 Pkt	0 Pkt	-29 dBm	13.49 V
1777123079	44 Pkt	0 Pkt	-29 dBm	13.49 V
1777122454	27 Pkt	0 Pkt	-29 dBm	13.47 V
1777121830	44 Pkt	0 Pkt	-30 dBm	13.43 V
1777121205	20 Pkt	0 Pkt	-30 dBm	13.43 V
1777120581	47 Pkt	0 Pkt	-29 dBm	13.49 V
1777119956	24 Pkt	0 Pkt	-30 dBm	13.49 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)