This is the latest recevied telemetry packets stored in our database for station/object WV8CH-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
RFIn*
RFiGate*
DigiRpt*
Temp*
InetiGate*
1753549845
65 Pkts
59 Pkts
31 Pkts
23 C
0 Pkts
1753546245
66 Pkts
61 Pkts
34 Pkts
25 C
0 Pkts
1753305046
61 Pkts
61 Pkts
40 Pkts
27 C
0 Pkts
1753114246
133 Pkts
131 Pkts
52 Pkts
25 C
0 Pkts
1753096247
171 Pkts
164 Pkts
38 Pkts
25 C
0 Pkts
1753081846
66 Pkts
64 Pkts
36 Pkts
25 C
0 Pkts
1753063846
71 Pkts
68 Pkts
22 Pkts
26 C
0 Pkts
1753056645
98 Pkts
95 Pkts
41 Pkts
26 C
0 Pkts
1752988245
66 Pkts
62 Pkts
32 Pkts
26 C
0 Pkts
1752977443
69 Pkts
67 Pkts
28 Pkts
26 C
0 Pkts
1752959447
128 Pkts
121 Pkts
45 Pkts
27 C
0 Pkts
1752955847
97 Pkts
96 Pkts
46 Pkts
26 C
0 Pkts
1752916247
70 Pkts
66 Pkts
32 Pkts
25 C
0 Pkts
1752897641
62 Pkts
61 Pkts
36 Pkts
26 C
0 Pkts
1752886841
95 Pkts
89 Pkts
36 Pkts
27 C
0 Pkts
1752879641
63 Pkts
62 Pkts
30 Pkts
27 C
0 Pkts
*Used Equation Coefficients:
RFIn: 0, 1, 0
RFiGate: 0, 1, 0
DigiRpt: 0, 1, 0
Temp: 0, 1, 0
InetiGate: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)