K1RAX-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K1RAX-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rand 1*	Rand 10*	Enter 255*	Wave*	Time*
1788570211	0.82 m	6.78 dB	123 Hz	167	20.99 h
1788570091	0.66 m	2.94 dB	116 Hz	141	20.99 h
1788569971	0.15 m	0.31 dB	125 Hz	114	20.89 h
1788569851	0.78 m	7.37 dB	76 Hz	88	20.89 h
1788569731	0.25 m	7.57 dB	30 Hz	64	20.89 h
1788569611	0.74 m	1.69 dB	23 Hz	42	20.8 h
1788569491	0.37 m	4.63 dB	55 Hz	24	20.8 h
1788569371	0.31 m	5.06 dB	27 Hz	11	20.8 h
1788569251	0.86 m	0.9 dB	237 Hz	3	20.71 h
1788569131	0.33 m	5.69 dB	89 Hz	0	20.71 h
1788569011	0.71 m	7.18 dB	120 Hz	3	20.71 h
1788568891	0.26 m	6.86 dB	21 Hz	11	20.61 h
1788568771	0.93 m	8.39 dB	138 Hz	24	20.61 h
1788568651	0.64 m	2.08 dB	172 Hz	42	20.61 h
1788568531	0.94 m	4.59 dB	202 Hz	64	20.52 h
1788568411	1 m	7.76 dB	243 Hz	88	20.52 h
1788568291	0.82 m	6.39 dB	251 Hz	114	20.42 h
1788568171	0.37 m	3.45 dB	93 Hz	141	20.42 h
1788568051	0.83 m	0.39 dB	253 Hz	167	20.42 h
1788567931	0.95 m	2.59 dB	75 Hz	191	20.33 h
1788567811	0.73 m	2.35 dB	129 Hz	213	20.33 h
1788567691	0.58 m	8.12 dB	132 Hz	231	20.33 h
1788567571	0.45 m	6.2 dB	238 Hz	244	20.24 h
1788567451	1 m	7.41 dB	218 Hz	252	20.24 h
1788567331	0.44 m	6.78 dB	235 Hz	255	20.24 h

*Used Equation Coefficients:

Rand 1: 0, 0.003922, 0

Rand 10: 0, 0.039216, 0

Enter 255: 0, 1, 0

Wave: 0, 1, 0

Time: 0, 0.094118, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)