DL3CK-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL3CK-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Celsius*	Rel_Hum*	Atm_Press*	GAS*
1765554612	16.2 C	61.71 %	1027.13 hPa	24.32 %
1765554443	15 C	62.41 %	1026.88 hPa	24.22 %
1765554153	14.9 C	60.89 %	1027 hPa	27.47 %
1765552333	14.4 C	66.95 %	1026.5 hPa	24.33 %
1765551946	11.5 C	69.02 %	1025.88 hPa	23.64 %
1765523573	18.1 C	63.74 %	1027.13 hPa	21.99 %
1765523200	16.3 C	66.94 %	1026.88 hPa	21.9 %
1765522771	12.9 C	71.32 %	1027.13 hPa	19.65 %
1765522533	12.5 C	70.02 %	982.88 hPa	16.49 %
1765487256	15.3 C	71.3 %	1026.25 hPa	23.07 %
1765486995	13.5 C	73.13 %	1026.25 hPa	23.71 %
1765486654	11.5 C	73.37 %	1026.5 hPa	22.85 %
1765486323	10.2 C	69.38 %	980.63 hPa	17.1 %
1765453824	16.9 C	69.92 %	1030.63 hPa	20.76 %
1765453523	14.7 C	71.24 %	1028.5 hPa	20.34 %
1765448217	13.1 C	71.03 %	983.88 hPa	23.02 %
1765447274	10.8 C	70.17 %	984.25 hPa	14.7 %
1765400187	13 C	71.2 %	1027 hPa	24.28 %
1765399963	11.8 C	71.82 %	1027.5 hPa	24.73 %
1765399730	10.1 C	71.87 %	1028.75 hPa	24.18 %
1765399497	8.3 C	69.76 %	982.38 hPa	19.56 %
1765368106	19.4 C	61.44 %	1024.75 hPa	20.68 %
1765367661	17.2 C	64.73 %	1024.75 hPa	21.32 %
1765367458	16 C	65.67 %	1024.38 hPa	20.76 %
1765367255	16.3 C	64.6 %	1026 hPa	25.42 %

*Used Equation Coefficients:

Celsius: 0, 0.1, -50

Rel_Hum: 0, 0.01, 0

Atm_Press: 0, 0.125, 0

GAS: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)