F4BYF-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F4BYF-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788567577	13.73 Volt	110 Pkt	30 Pkt	47 Pcnt
1788565777	13.73 Volt	100 Pkt	30 Pkt	46 Pcnt
1788563975	13.73 Volt	100 Pkt	20 Pkt	52 Pcnt
1788562175	13.73 Volt	70 Pkt	20 Pkt	55 Pcnt
1788560372	13.73 Volt	70 Pkt	20 Pkt	54 Pcnt
1788556769	13.73 Volt	60 Pkt	10 Pkt	58 Pcnt
1788553164	13.73 Volt	50 Pkt	10 Pkt	55 Pcnt
1788549561	13.73 Volt	80 Pkt	30 Pkt	63 Pcnt
1788547760	13.73 Volt	100 Pkt	50 Pkt	63 Pcnt
1788545958	13.73 Volt	90 Pkt	40 Pkt	66 Pcnt
1788544156	13.73 Volt	60 Pkt	20 Pkt	81 Pcnt
1788542355	13.73 Volt	60 Pkt	20 Pkt	84 Pcnt
1788540553	13.73 Volt	70 Pkt	30 Pkt	80 Pcnt
1788538751	13.73 Volt	90 Pkt	40 Pkt	75 Pcnt
1788535147	13.73 Volt	120 Pkt	60 Pkt	74 Pcnt
1788533344	13.73 Volt	70 Pkt	30 Pkt	78 Pcnt
1788531545	13.73 Volt	80 Pkt	20 Pkt	76 Pcnt
1788529743	13.73 Volt	130 Pkt	20 Pkt	69 Pcnt
1788527941	13.73 Volt	180 Pkt	30 Pkt	73 Pcnt
1788520734	13.73 Volt	240 Pkt	80 Pkt	69 Pcnt
1788515329	13.73 Volt	300 Pkt	60 Pkt	60 Pcnt
1788513525	13.73 Volt	420 Pkt	90 Pkt	67 Pcnt
1788511756	13.58 Volt	470 Pkt	100 Pkt	63 Pcnt
1788509922	13.73 Volt	540 Pkt	120 Pkt	58 Pcnt
1788508119	13.73 Volt	580 Pkt	140 Pkt	58 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)