DO2ZZ-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DO2ZZ-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1766001722	964.6 hPa	8 C deg	1026 hPa	1 C deg
1765992721	964.1 hPa	9.6 C deg	1025.1 hPa	4.1 C deg
1765989140	963.6 hPa	9.8 C deg	1024.5 hPa	5.7 C deg
1765987321	963.4 hPa	9.9 C deg	1024.3 hPa	6 C deg
1765985521	963.2 hPa	9.9 C deg	1024.1 hPa	6.4 C deg
1765983721	963.2 hPa	9.8 C deg	1024.1 hPa	6.8 C deg
1765981920	963.2 hPa	9.6 C deg	1024.1 hPa	7.2 C deg
1765980141	963 hPa	9.4 C deg	1024 hPa	7.2 C deg
1765978320	962.8 hPa	9 C deg	1023.9 hPa	7.2 C deg
1765976520	962.8 hPa	8.5 C deg	1024 hPa	7.6 C deg
1765974720	962.8 hPa	7.7 C deg	1024.1 hPa	9.5 C deg
1765972920	962.8 hPa	7 C deg	1024.4 hPa	8.6 C deg
1765971120	962.9 hPa	6.4 C deg	1024.5 hPa	6.1 C deg
1765969320	963 hPa	5.9 C deg	1024.7 hPa	5.6 C deg
1765967520	962.8 hPa	5.4 C deg	1024.7 hPa	4.8 C deg
1765965720	962.8 hPa	5.1 C deg	1024.8 hPa	3.6 C deg
1765963920	962.9 hPa	4.8 C deg	1024.9 hPa	2.6 C deg
1765962119	962.6 hPa	4.7 C deg	1024.7 hPa	1.8 C deg
1765960319	962.5 hPa	4.6 C deg	1024.6 hPa	1.1 C deg
1765958535	962.3 hPa	4.5 C deg	1024.4 hPa	0.6 C deg
1765956718	962.1 hPa	4.4 C deg	1024.1 hPa	0.2 C deg
1765954918	961.5 hPa	4.4 C deg	1023.5 hPa	0 C deg
1765953118	961.1 hPa	4.3 C deg	1023.1 hPa	0.1 C deg
1765951318	960.8 hPa	4.2 C deg	1022.8 hPa	0 C deg
1765949518	960.7 hPa	4.7 C deg	1022.6 hPa	-0.2 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)