SR9NKU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9NKU. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1773292805	44 Deg.C	2 %
1773292201	45 Deg.C	2 %
1773291605	45 Deg.C	2 %
1773291002	45 Deg.C	2 %
1773290404	46 Deg.C	2 %
1773289801	46 Deg.C	2 %
1773289201	46 Deg.C	2 %
1773288605	46 Deg.C	2 %
1773288001	45 Deg.C	2 %
1773287404	47 Deg.C	2 %
1773286802	46 Deg.C	2 %
1773286205	44 Deg.C	2 %
1773285602	45 Deg.C	2 %
1773285001	44 Deg.C	2 %
1773284405	44 Deg.C	2 %
1773283802	44 Deg.C	2 %
1773283205	45 Deg.C	2 %
1773282601	47 Deg.C	2 %
1773282005	48 Deg.C	2 %
1773281402	46 Deg.C	2 %
1773280801	48 Deg.C	2 %
1773280204	48 Deg.C	2 %
1773279602	48 Deg.C	2 %
1773279010	47 Deg.C	2 %
1773278402	45 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)