E29JAU-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E29JAU-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1785339136	11 Pkt	-63 dBm	0.06 V
1785338510	12 Pkt	-63 dBm	0.06 V
1785337883	12 Pkt	-63 dBm	0.08 V
1785337256	12 Pkt	-63 dBm	0.06 V
1785336630	12 Pkt	-63 dBm	0.06 V
1785336003	12 Pkt	-62 dBm	0.08 V
1785335376	12 Pkt	-62 dBm	0.06 V
1785334750	12 Pkt	-63 dBm	0.08 V
1785334123	12 Pkt	-62 dBm	0.04 V
1785333496	11 Pkt	-63 dBm	0.08 V
1785332869	9 Pkt	-63 dBm	0.08 V
1785332244	9 Pkt	-63 dBm	0.06 V
1785331616	8 Pkt	-63 dBm	0.06 V
1785330991	11 Pkt	-63 dBm	0.06 V
1785330365	12 Pkt	-63 dBm	0.06 V
1785329738	12 Pkt	-64 dBm	0.06 V
1785329111	12 Pkt	-64 dBm	0.06 V
1785328484	8 Pkt	-64 dBm	0.06 V
1785327859	12 Pkt	-63 dBm	0.06 V
1785327233	12 Pkt	-69 dBm	0.06 V
1785326605	12 Pkt	-63 dBm	0.08 V
1785325978	12 Pkt	-63 dBm	0.06 V
1785325350	12 Pkt	-63 dBm	0.06 V
1785324722	12 Pkt	-63 dBm	0.06 V
1785324096	12 Pkt	-64 dBm	0.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)