EA4FKJ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA4FKJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1780539012	0 Count	73 Count	0 Count	0 VDC	0 VDC
1780537213	0 Count	49 Count	0 Count	0 VDC	0 VDC
1780535412	0 Count	27 Count	0 Count	0 VDC	0 VDC
1780533611	0 Count	1020 Count	0 Count	0 VDC	0 VDC
1780531811	0 Count	998 Count	0 Count	0 VDC	0 VDC
1780530011	0 Count	982 Count	0 Count	0 VDC	0 VDC
1780528211	0 Count	967 Count	0 Count	0 VDC	0 VDC
1780526411	0 Count	952 Count	0 Count	0 VDC	0 VDC
1780524611	0 Count	934 Count	0 Count	0 VDC	0 VDC
1780522811	0 Count	918 Count	0 Count	0 VDC	0 VDC
1780499410	0 Count	694 Count	0 Count	0 VDC	0 VDC
1780497610	0 Count	678 Count	0 Count	0 VDC	0 VDC
1780495988	0 Count	660 Count	0 Count	0 VDC	0 VDC
1780494009	0 Count	637 Count	0 Count	0 VDC	0 VDC
1780492209	0 Count	612 Count	0 Count	0 VDC	0 VDC
1780490409	0 Count	586 Count	0 Count	0 VDC	0 VDC
1780488609	0 Count	564 Count	0 Count	0 VDC	0 VDC
1780486808	0 Count	548 Count	0 Count	0 VDC	0 VDC
1780485008	0 Count	531 Count	0 Count	0 VDC	0 VDC
1780483208	0 Count	513 Count	0 Count	0 VDC	0 VDC
1780481408	0 Count	492 Count	0 Count	0 VDC	0 VDC
1780479608	0 Count	473 Count	0 Count	0 VDC	0 VDC
1780456209	0 Count	173 Count	0 Count	0 VDC	0 VDC
1780454409	0 Count	152 Count	0 Count	0 VDC	0 VDC
1780452609	0 Count	131 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)