IR1W Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1W. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Batteria*	Caricabatteria*	Temperatura RTX*	Potenza TX*
1753635090	12.5 Volt	0 Ampere	214.04 C	10 Watt
1753634184	12.5 Volt	0 Ampere	219.7 C	10 Watt
1753633281	12.5 Volt	0 Ampere	219.7 C	10 Watt
1753630572	12.6 Volt	0 Ampere	225.37 C	10 Watt
1753628765	12.5 Volt	0 Ampere	225.37 C	10 Watt
1753625152	12.6 Volt	0 Ampere	225.37 C	10 Watt
1753621539	12.9 Volt	0.4 Ampere	214.04 C	10 Watt
1753618830	12.7 Volt	0 Ampere	208.38 C	10 Watt
1753617927	12.7 Volt	0 Ampere	208.38 C	10 Watt
1753616120	12.6 Volt	0 Ampere	214.04 C	10 Watt
1753615217	12.7 Volt	0 Ampere	219.7 C	10 Watt
1753613411	12.9 Volt	0.4 Ampere	219.7 C	10 Watt
1753610701	12.9 Volt	0.79 Ampere	208.38 C	10 Watt
1753603475	12.2 Volt	0 Ampere	185.72 C	10 Watt
1753602572	11.8 Volt	0 Ampere	185.72 C	10 Watt
1753601669	12.2 Volt	0 Ampere	185.72 C	10 Watt
1753600766	11.8 Volt	0 Ampere	185.72 C	10 Watt
1753599863	12.2 Volt	0 Ampere	178.64 C	10 Watt
1753598960	12.2 Volt	0 Ampere	178.64 C	10 Watt
1753598056	12.1 Volt	0 Ampere	178.64 C	10 Watt
1753597153	12.2 Volt	0 Ampere	178.64 C	10 Watt
1753594444	12.2 Volt	0 Ampere	172.98 C	10 Watt
1753592637	12 Volt	0 Ampere	167.31 C	10 Watt
1753588121	12.2 Volt	0 Ampere	167.31 C	10 Watt
1753587218	12.2 Volt	0 Ampere	167.31 C	10 Watt

*Used Equation Coefficients:

Batteria: 0, 0.1, 0

Caricabatteria: 0, 0.198, -25.344

Pannello: 0, 0.1, 0

Temperatura RTX: 0, 1.416, -55

Potenza TX: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)