DM6CS-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM6CS-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1781694405	961.3 hPa	31.9 C deg	1016.1 hPa	0 C deg
1781692590	961.3 hPa	31.1 C deg	1016.2 hPa	0 C deg
1781690775	961.1 hPa	30.2 C deg	1016.2 hPa	0 C deg
1781688959	961.2 hPa	29.4 C deg	1016.4 hPa	0 C deg
1781687144	961.1 hPa	28.7 C deg	1016.4 hPa	0 C deg
1781685329	961 hPa	27.6 C deg	1016.6 hPa	0 C deg
1781683514	960.7 hPa	26.6 C deg	1016.5 hPa	0 C deg
1781681699	960.8 hPa	25.6 C deg	1016.7 hPa	0 C deg
1781679884	960.8 hPa	25 C deg	1016.8 hPa	0 C deg
1781678069	960.7 hPa	24.5 C deg	1016.8 hPa	0 C deg
1781676254	960.5 hPa	24.2 C deg	1016.7 hPa	0 C deg
1781674439	960.4 hPa	24 C deg	1016.6 hPa	0 C deg
1781672624	960.2 hPa	23.8 C deg	1016.5 hPa	0 C deg
1781670808	960 hPa	23.7 C deg	1016.3 hPa	0 C deg
1781668993	959.8 hPa	23.9 C deg	1016 hPa	0 C deg
1781667178	959.6 hPa	24.1 C deg	1015.7 hPa	0 C deg
1781665363	959.3 hPa	24.3 C deg	1015.4 hPa	0 C deg
1781663548	959 hPa	24.5 C deg	1015 hPa	0 C deg
1781661733	958.9 hPa	24.7 C deg	1014.9 hPa	0 C deg
1781659918	958.9 hPa	25 C deg	1014.9 hPa	0 C deg
1781658103	958.8 hPa	25.3 C deg	1014.7 hPa	0 C deg
1781656288	958.7 hPa	25.6 C deg	1014.5 hPa	0 C deg
1781654473	958.7 hPa	26 C deg	1014.5 hPa	0 C deg
1781652658	958.5 hPa	26.3 C deg	1014.2 hPa	0 C deg
1781650843	958.4 hPa	26.5 C deg	1014.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)