OK4AB-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK4AB-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Temperatu*	Humidity*	Pressure*	Battery*	Satellite*
1773247859	29.11 C	42.34 %	975.5 hPa	0	9
1773247844	29.1 C	42.33 %	975.5 hPa	0	9
1773247831	29.07 C	42.44 %	975.5 hPa	0.1	0
1773247827	29.07 C	42.44 %	975.5 hPa	0	10
1773247812	29.07 C	42.08 %	975.5 hPa	0	10
1773247804	29.06 C	42.06 %	975.5 hPa	0	10
1773247770	29.04 C	41.82 %	975.5 hPa	0.1	0
1773247765	29.04 C	41.82 %	975.5 hPa	0	10
1773247714	29.02 C	41.79 %	975.5 hPa	0	10
1773247710	29.02 C	41.85 %	975.5 hPa	0.09	0
1773247543	28.9 C	41.92 %	975.5 hPa	0	11
1773247534	28.9 C	41.92 %	975.5 hPa	0	11
1773247453	28.85 C	41.99 %	975.5 hPa	0	8
1773247423	28.82 C	42.02 %	975.5 hPa	0	8
1773247413	28.81 C	42.02 %	975.5 hPa	0	9
1773247410	28.81 C	42.02 %	975.5 hPa	0.09	0
1773247391	28.79 C	41.07 %	975.5 hPa	0	9
1773247380	28.79 C	42.04 %	975.5 hPa	0	8
1773247363	28.78 C	42.06 %	975.5 hPa	0	8
1773247353	28.77 C	42.08 %	975.5 hPa	0	9
1773247349	28.77 C	42.08 %	975.5 hPa	0.09	0
1773247323	28.75 C	41.11 %	975.5 hPa	0	9
1773247314	28.73 C	42.11 %	975.5 hPa	0	9
1773247295	28.72 C	42.13 %	975.5 hPa	0	9
1773247289	28.72 C	42.13 %	975.5 hPa	0.09	0

*Used Equation Coefficients:

Temperatu: 0, 0.01, 0

Humidity: 0, 0.01, 0

Pressure: 0, 0.1, 800

Battery: 0, 0.01, 0

Satellite: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)