IZ0FKE-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ0FKE-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU*	RAM*
1761543635	50 %	10 %
1761543034	43 %	10 %
1761542433	51 %	10 %
1761541831	46 %	10 %
1761541230	51 %	10 %
1761540628	42 %	10 %
1761540027	48 %	10 %
1761539425	48 %	10 %
1761538824	48 %	10 %
1761538223	47 %	10 %
1761537621	48 %	10 %
1761537020	44 %	10 %
1761536418	48 %	10 %
1761535817	52 %	10 %
1761535216	49 %	10 %
1761534614	49 %	10 %
1761534013	50 %	10 %
1761533411	44 %	10 %
1761532810	49 %	10 %
1761532208	50 %	10 %
1761531607	47 %	10 %
1761531006	46 %	10 %
1761530404	39 %	10 %
1761529803	47 %	10 %
1761529201	45 %	10 %

*Used Equation Coefficients:

CPU: 0, 1, 0

TMP: 0, 1, 0

RAM: 0, 1, 0

PNG: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)