DL6DCA-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL6DCA-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Voltage*	Celsius*	Rel_Hum*	Atm_Press*
1776978333	3.63 VDC	20.2 C	28.01 %	1028.5 hPa
1776970191	4.1 VDC	30.8 C	21.71 %	1026.25 hPa
1776969879	4.07 VDC	29.1 C	22.48 %	1028 hPa
1776968508	3.68 VDC	24 C	24.4 %	1026.75 hPa
1776963885	4.05 VDC	35.6 C	18.41 %	1029 hPa
1776963549	4.02 VDC	34 C	19.71 %	1025.88 hPa
1776963270	3.93 VDC	29.8 C	21.54 %	1027.75 hPa
1776956690	4.02 VDC	44.3 C	13.76 %	1026.75 hPa
1776956316	3.99 VDC	45.4 C	13.59 %	1027.5 hPa
1776955887	3.95 VDC	46.7 C	14.77 %	1028.75 hPa
1776953869	3.99 VDC	41.4 C	15.92 %	1028.13 hPa
1776952304	3.6 VDC	40.4 C	19.01 %	1030.25 hPa
1776945888	3.95 VDC	44.1 C	15.79 %	1030.25 hPa
1776941300	3.69 VDC	46.1 C	20.82 %	1032.13 hPa
1776935773	4.03 VDC	44.6 C	17.04 %	1029.88 hPa
1776935376	4.01 VDC	43 C	18.62 %	1030.38 hPa
1776935027	3.99 VDC	42.3 C	19.82 %	1032 hPa
1776934028	3.71 VDC	35.9 C	23.91 %	1030.38 hPa
1776932806	4.01 VDC	37.9 C	21.5 %	1031.38 hPa
1776932567	3.99 VDC	38.1 C	22.45 %	1030.75 hPa
1776932162	3.91 VDC	37.7 C	23.69 %	1031.25 hPa
1776931097	3.8 VDC	33.7 C	31.12 %	1032.13 hPa
1776929789	3.78 VDC	23.4 C	35.58 %	1030 hPa
1776926307	3.85 VDC	26.5 C	33.88 %	1030.13 hPa
1776925699	3.78 VDC	17.7 C	37.91 %	1032 hPa

*Used Equation Coefficients:

Voltage: 0, 0.01, 0

Celsius: 0, 0.1, -50

Rel_Hum: 0, 0.01, 0

Atm_Press: 0, 0.125, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)