DH3CW-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DH3CW-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1789945954	993.7 hPa	20.3 C deg	1024.2 hPa	0 C deg
1789944139	993.7 hPa	20.6 C deg	1024.2 hPa	0 C deg
1789942324	993.5 hPa	20.8 C deg	1024 hPa	0 C deg
1789940509	993.2 hPa	21.3 C deg	1023.5 hPa	0 C deg
1789938694	992.8 hPa	21.7 C deg	1023.2 hPa	0 C deg
1789936879	992.5 hPa	22.2 C deg	1022.8 hPa	0 C deg
1789935064	991.9 hPa	22.6 C deg	1022.1 hPa	0 C deg
1789933249	991.4 hPa	22.9 C deg	1021.6 hPa	0 C deg
1789931434	991 hPa	22.9 C deg	1021.2 hPa	0 C deg
1789929619	990.8 hPa	23.2 C deg	1020.9 hPa	0 C deg
1789927804	989.9 hPa	24.3 C deg	1019.9 hPa	0 C deg
1789925989	989.1 hPa	24.3 C deg	1019 hPa	0 C deg
1789924174	989.2 hPa	24.3 C deg	1019.2 hPa	0 C deg
1789922359	988.9 hPa	24 C deg	1018.9 hPa	0 C deg
1789920544	988.8 hPa	23.6 C deg	1018.9 hPa	0 C deg
1789918728	989.1 hPa	23.6 C deg	1019.1 hPa	0 C deg
1789916913	989.7 hPa	24 C deg	1019.7 hPa	0 C deg
1789915098	990 hPa	24.2 C deg	1020 hPa	0 C deg
1789913283	989.9 hPa	25.5 C deg	1019.7 hPa	0 C deg
1789911468	989.6 hPa	27.7 C deg	1019.2 hPa	0 C deg
1789909653	989.8 hPa	28.7 C deg	1019.3 hPa	0 C deg
1789907838	989.9 hPa	28.2 C deg	1019.5 hPa	0 C deg
1789906023	990.3 hPa	27.8 C deg	1019.9 hPa	0 C deg
1789904208	990.9 hPa	29.2 C deg	1020.4 hPa	0 C deg
1789902393	990.6 hPa	29.7 C deg	1020.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)