IQ2CY-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ2CY-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*	Batt*	Volt Aux*	Ampere Aux*
1773102047	29 Pkt/10m	0 Pkt/10m	4.1 Volt	0.5 Volt	-1.27 Ampere
1773101443	34 Pkt/10m	0 Pkt/10m	4.1 Volt	0.5 Volt	-1.27 Ampere
1773100841	28 Pkt/10m	0 Pkt/10m	3.98 Volt	0.5 Volt	-1.27 Ampere
1773100235	24 Pkt/10m	0 Pkt/10m	4.08 Volt	0.5 Volt	-1.27 Ampere
1773099631	25 Pkt/10m	0 Pkt/10m	4 Volt	0.5 Volt	-1.27 Ampere
1773099028	18 Pkt/10m	0 Pkt/10m	4.06 Volt	0.5 Volt	-1.27 Ampere
1773098425	16 Pkt/10m	0 Pkt/10m	4 Volt	0.5 Volt	-1.27 Ampere
1773098004	24 Pkt/10m	0 Pkt/10m	4.08 Volt	0.5 Volt	-1.27 Ampere
1773097402	18 Pkt/10m	0 Pkt/10m	4.1 Volt	0.5 Volt	-1.27 Ampere
1773096797	25 Pkt/10m	0 Pkt/10m	4.02 Volt	0.6 Volt	-1.27 Ampere
1773096193	14 Pkt/10m	0 Pkt/10m	4.06 Volt	0.5 Volt	-1.27 Ampere
1773095589	18 Pkt/10m	0 Pkt/10m	4 Volt	0.5 Volt	-1.27 Ampere
1773094986	17 Pkt/10m	0 Pkt/10m	4.06 Volt	0.5 Volt	-1.27 Ampere
1773094382	22 Pkt/10m	0 Pkt/10m	3.96 Volt	0.5 Volt	-1.27 Ampere
1773093777	14 Pkt/10m	0 Pkt/10m	4.08 Volt	0.5 Volt	-1.27 Ampere
1773093174	10 Pkt/10m	0 Pkt/10m	4.1 Volt	0.5 Volt	-1.27 Ampere
1773092570	11 Pkt/10m	0 Pkt/10m	4.1 Volt	0.5 Volt	-1.27 Ampere
1773091967	8 Pkt/10m	0 Pkt/10m	4.06 Volt	0.5 Volt	-1.27 Ampere
1773091363	13 Pkt/10m	0 Pkt/10m	4.08 Volt	0.5 Volt	-1.27 Ampere
1773090757	21 Pkt/10m	0 Pkt/10m	4.06 Volt	0.5 Volt	-1.27 Ampere
1773090153	19 Pkt/10m	0 Pkt/10m	4.06 Volt	0.5 Volt	-1.27 Ampere
1773089548	42 Pkt/10m	0 Pkt/10m	3.98 Volt	0.6 Volt	-1.27 Ampere
1773088944	28 Pkt/10m	0 Pkt/10m	4.02 Volt	0.5 Volt	-1.27 Ampere
1773088341	15 Pkt/10m	0 Pkt/10m	3.98 Volt	0.5 Volt	-1.27 Ampere
1773087737	21 Pkt/10m	0 Pkt/10m	4.02 Volt	0.5 Volt	-1.27 Ampere

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Volt Aux: 0, 0.1, 0

Ampere Aux: 0, 0.01, -1.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)