SK4DM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SK4DM-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1757655734	0.03 Rx Erlang	0.01 Tx Erlang	29 count/10m	0 count/10m	13 count/10m
1757654534	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	12 count/10m
1757653334	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	11 count/10m
1757652133	0.02 Rx Erlang	0.01 Tx Erlang	24 count/10m	0 count/10m	12 count/10m
1757650934	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	10 count/10m
1757649734	0.02 Rx Erlang	0.01 Tx Erlang	23 count/10m	0 count/10m	12 count/10m
1757648538	0.02 Rx Erlang	0.01 Tx Erlang	25 count/10m	0 count/10m	13 count/10m
1757647334	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	0 count/10m	13 count/10m
1757646134	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	0 count/10m	13 count/10m
1757644934	0.02 Rx Erlang	0.01 Tx Erlang	27 count/10m	0 count/10m	14 count/10m
1757643734	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	0 count/10m	11 count/10m
1757642534	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	13 count/10m
1757641334	0.02 Rx Erlang	0.01 Tx Erlang	24 count/10m	0 count/10m	13 count/10m
1757640134	0.02 Rx Erlang	0.01 Tx Erlang	26 count/10m	0 count/10m	14 count/10m
1757638934	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	11 count/10m
1757637733	0.02 Rx Erlang	0.01 Tx Erlang	24 count/10m	0 count/10m	13 count/10m
1757636533	0.02 Rx Erlang	0.01 Tx Erlang	23 count/10m	0 count/10m	13 count/10m
1757635334	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	0 count/10m	14 count/10m
1757634133	0.02 Rx Erlang	0.01 Tx Erlang	24 count/10m	0 count/10m	13 count/10m
1757632934	0.02 Rx Erlang	0.01 Tx Erlang	24 count/10m	0 count/10m	11 count/10m
1757631733	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	0 count/10m	12 count/10m
1757630533	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	11 count/10m
1757629334	0.02 Rx Erlang	0.01 Tx Erlang	23 count/10m	0 count/10m	13 count/10m
1757628133	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	0 count/10m	14 count/10m
1757626933	0.03 Rx Erlang	0.01 Tx Erlang	26 count/10m	0 count/10m	13 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)