DB0HFT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0HFT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1776658112	0.06 Rx Erlang	0.01 Tx Erlang	62 count/10m	0 count/10m	6 count/10m
1776656912	0.08 Rx Erlang	0.01 Tx Erlang	75 count/10m	0 count/10m	6 count/10m
1776655712	0.07 Rx Erlang	0.01 Tx Erlang	63 count/10m	0 count/10m	5 count/10m
1776654512	0.08 Rx Erlang	0.01 Tx Erlang	72 count/10m	0 count/10m	5 count/10m
1776653312	0.07 Rx Erlang	0.01 Tx Erlang	61 count/10m	0 count/10m	6 count/10m
1776652112	0.07 Rx Erlang	0.01 Tx Erlang	63 count/10m	0 count/10m	5 count/10m
1776650912	0.1 Rx Erlang	0.01 Tx Erlang	76 count/10m	15 count/10m	4 count/10m
1776649711	0.08 Rx Erlang	0.01 Tx Erlang	74 count/10m	18 count/10m	4 count/10m
1776648512	0.07 Rx Erlang	0.01 Tx Erlang	65 count/10m	6 count/10m	4 count/10m
1776647312	0.06 Rx Erlang	0.01 Tx Erlang	59 count/10m	0 count/10m	6 count/10m
1776646112	0.07 Rx Erlang	0.01 Tx Erlang	67 count/10m	0 count/10m	5 count/10m
1776644912	0.07 Rx Erlang	0.01 Tx Erlang	64 count/10m	0 count/10m	6 count/10m
1776643712	0.08 Rx Erlang	0.01 Tx Erlang	69 count/10m	0 count/10m	6 count/10m
1776642512	0.07 Rx Erlang	0.01 Tx Erlang	62 count/10m	0 count/10m	5 count/10m
1776641311	0.06 Rx Erlang	0.01 Tx Erlang	63 count/10m	0 count/10m	5 count/10m
1776640116	0.06 Rx Erlang	0.01 Tx Erlang	60 count/10m	0 count/10m	5 count/10m
1776638912	0.05 Rx Erlang	0 Tx Erlang	45 count/10m	0 count/10m	4 count/10m
1776637712	0.05 Rx Erlang	0 Tx Erlang	47 count/10m	0 count/10m	3 count/10m
1776636512	0.06 Rx Erlang	0.01 Tx Erlang	58 count/10m	0 count/10m	5 count/10m
1776635312	0.08 Rx Erlang	0.01 Tx Erlang	73 count/10m	0 count/10m	5 count/10m
1776634112	0.07 Rx Erlang	0.01 Tx Erlang	71 count/10m	0 count/10m	5 count/10m
1776632912	0.07 Rx Erlang	0.01 Tx Erlang	67 count/10m	0 count/10m	4 count/10m
1776631712	0.09 Rx Erlang	0.01 Tx Erlang	86 count/10m	0 count/10m	6 count/10m
1776630512	0.07 Rx Erlang	0.01 Tx Erlang	63 count/10m	0 count/10m	6 count/10m
1776629312	0.06 Rx Erlang	0 Tx Erlang	59 count/10m	0 count/10m	4 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)