PY3NZ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PY3NZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1753664757	0.01 Rx Erlang	0.15 Tx Erlang	5 count/10m	4 count/10m	72 count/10m
1753662357	0.01 Rx Erlang	0.1 Tx Erlang	4 count/10m	2 count/10m	52 count/10m
1753661157	0.01 Rx Erlang	0.06 Tx Erlang	4 count/10m	2 count/10m	35 count/10m
1753659957	0.01 Rx Erlang	0.05 Tx Erlang	8 count/10m	7 count/10m	34 count/10m
1753658779	0.01 Rx Erlang	0.05 Tx Erlang	7 count/10m	4 count/10m	36 count/10m
1753657557	0.02 Rx Erlang	0.06 Tx Erlang	16 count/10m	12 count/10m	36 count/10m
1753656357	0.02 Rx Erlang	0.05 Tx Erlang	8 count/10m	6 count/10m	34 count/10m
1753655157	0.04 Rx Erlang	0.06 Tx Erlang	41 count/10m	11 count/10m	36 count/10m
1753653972	0.02 Rx Erlang	0.06 Tx Erlang	16 count/10m	6 count/10m	36 count/10m
1753652757	0.02 Rx Erlang	0.06 Tx Erlang	18 count/10m	2 count/10m	35 count/10m
1753651557	0.02 Rx Erlang	0.06 Tx Erlang	11 count/10m	9 count/10m	36 count/10m
1753650357	0.02 Rx Erlang	0.05 Tx Erlang	8 count/10m	5 count/10m	35 count/10m
1753649157	0.01 Rx Erlang	0.06 Tx Erlang	6 count/10m	5 count/10m	36 count/10m
1753647957	0.01 Rx Erlang	0.06 Tx Erlang	10 count/10m	7 count/10m	38 count/10m
1753646757	0.01 Rx Erlang	0.05 Tx Erlang	10 count/10m	7 count/10m	34 count/10m
1753645557	0.02 Rx Erlang	0.05 Tx Erlang	10 count/10m	8 count/10m	34 count/10m
1753643157	0.03 Rx Erlang	0.05 Tx Erlang	14 count/10m	12 count/10m	34 count/10m
1753641957	0.03 Rx Erlang	0.05 Tx Erlang	17 count/10m	10 count/10m	34 count/10m
1753640757	0.05 Rx Erlang	0.05 Tx Erlang	40 count/10m	15 count/10m	35 count/10m
1753639557	0.05 Rx Erlang	0.09 Tx Erlang	29 count/10m	23 count/10m	49 count/10m
1753638357	0.03 Rx Erlang	0.06 Tx Erlang	18 count/10m	18 count/10m	38 count/10m
1753637157	0.02 Rx Erlang	0.05 Tx Erlang	14 count/10m	12 count/10m	34 count/10m
1753634757	0.02 Rx Erlang	0.06 Tx Erlang	12 count/10m	11 count/10m	35 count/10m
1753633557	0.03 Rx Erlang	0.06 Tx Erlang	12 count/10m	9 count/10m	35 count/10m
1753632357	0.02 Rx Erlang	0.06 Tx Erlang	11 count/10m	10 count/10m	34 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)