WC4PEM-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1788575103	26 C	14.18 Volt	270 Pkt	990 Pkt	78 Pcnt
1788574803	25 C	14.18 Volt	270 Pkt	1000 Pkt	79 Pcnt
1788574503	25 C	14.18 Volt	270 Pkt	990 Pkt	78 Pcnt
1788574205	25.5 C	14.18 Volt	270 Pkt	990 Pkt	78 Pcnt
1788574203	25.5 C	14.18 Volt	270 Pkt	990 Pkt	78 Pcnt
1788573903	25.5 C	14.18 Volt	270 Pkt	1000 Pkt	79 Pcnt
1788573603	25.5 C	14.25 Volt	270 Pkt	1010 Pkt	79 Pcnt
1788573603	25.5 C	14.25 Volt	270 Pkt	1010 Pkt	79 Pcnt
1788573303	25.5 C	14.18 Volt	270 Pkt	990 Pkt	80 Pcnt
1788573003	25 C	14.18 Volt	280 Pkt	1010 Pkt	80 Pcnt
1788572703	25.5 C	14.18 Volt	270 Pkt	1000 Pkt	81 Pcnt
1788572404	25.5 C	14.18 Volt	270 Pkt	1000 Pkt	81 Pcnt
1788572403	25.5 C	14.18 Volt	270 Pkt	1000 Pkt	81 Pcnt
1788572103	26 C	14.18 Volt	270 Pkt	990 Pkt	80 Pcnt
1788571803	25 C	14.18 Volt	270 Pkt	990 Pkt	80 Pcnt
1788571803	25 C	14.18 Volt	270 Pkt	990 Pkt	80 Pcnt
1788571503	25.5 C	14.18 Volt	270 Pkt	990 Pkt	78 Pcnt
1788571203	25.5 C	14.18 Volt	270 Pkt	990 Pkt	78 Pcnt
1788571203	25.5 C	14.18 Volt	270 Pkt	990 Pkt	78 Pcnt
1788570903	26 C	14.18 Volt	260 Pkt	990 Pkt	77 Pcnt
1788570634	26 C	14.18 Volt	260 Pkt	970 Pkt	75 Pcnt
1788570634	26 C	14.18 Volt	260 Pkt	970 Pkt	75 Pcnt
1788570303	25 C	14.18 Volt	260 Pkt	960 Pkt	74 Pcnt
1788570004	25.5 C	14.18 Volt	250 Pkt	950 Pkt	73 Pcnt
1788570003	25.5 C	14.18 Volt	250 Pkt	950 Pkt	73 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)