DB0HFT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0HFT-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	ATx*	FTx*	CPUld*
1777251046	37.5 Grad.C	21.1 Grad.C	21.8 Grad.C	6 perc
1777250554	38.6 Grad.C	21 Grad.C	21.9 Grad.C	5 perc
1777250053	38.6 Grad.C	21.1 Grad.C	21.8 Grad.C	6 perc
1777249513	38.6 Grad.C	21.2 Grad.C	22 Grad.C	8 perc
1777248980	39.1 Grad.C	21.3 Grad.C	22.2 Grad.C	9 perc
1777248484	38.6 Grad.C	21.3 Grad.C	22.4 Grad.C	6 perc
1777247946	38.6 Grad.C	21.3 Grad.C	22 Grad.C	3 perc
1777247410	38.6 Grad.C	21.3 Grad.C	22 Grad.C	8 perc
1777246828	38.6 Grad.C	21.3 Grad.C	22.1 Grad.C	6 perc
1777246248	38 Grad.C	21.2 Grad.C	21.9 Grad.C	7 perc
1777245668	38.6 Grad.C	21.3 Grad.C	22.1 Grad.C	8 perc
1777245086	39.1 Grad.C	21.1 Grad.C	22.3 Grad.C	5 perc
1777244529	38.6 Grad.C	21.3 Grad.C	22.3 Grad.C	6 perc
1777243958	39.1 Grad.C	21.2 Grad.C	22 Grad.C	5 perc
1777243404	38.6 Grad.C	21.3 Grad.C	22.1 Grad.C	8 perc
1777242879	38.6 Grad.C	21.5 Grad.C	22.1 Grad.C	6 perc
1777242353	38.6 Grad.C	21.5 Grad.C	22.2 Grad.C	8 perc
1777241823	39.1 Grad.C	21.5 Grad.C	22.6 Grad.C	5 perc
1777241335	38.6 Grad.C	21.4 Grad.C	22.5 Grad.C	7 perc
1777240784	38.6 Grad.C	21.5 Grad.C	22.1 Grad.C	6 perc
1777240277	39.1 Grad.C	21.5 Grad.C	22.3 Grad.C	6 perc
1777239694	38.6 Grad.C	21.6 Grad.C	22.6 Grad.C	6 perc
1777239139	39.1 Grad.C	21.7 Grad.C	22.5 Grad.C	3 perc
1777238582	38.6 Grad.C	21.7 Grad.C	22.6 Grad.C	5 perc
1777238017	39.7 Grad.C	21.7 Grad.C	22.9 Grad.C	5 perc

*Used Equation Coefficients:

Cpu: 0, 0.1, 0

ATx: 0, 0.1, 0

FTx: 0, 0.1, 0

CPUld: 0, 1, 0

MEMl: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)