DB6TOM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB6TOM-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1789946943	12.01 Volt	60 Pkt	10 Pkt	97 Pcnt
1789946643	12.09 Volt	60 Pkt	10 Pkt	97 Pcnt
1789946343	12.09 Volt	70 Pkt	10 Pkt	97 Pcnt
1789946043	12.01 Volt	70 Pkt	10 Pkt	97 Pcnt
1789945743	12.01 Volt	70 Pkt	10 Pkt	97 Pcnt
1789945443	12.01 Volt	70 Pkt	10 Pkt	97 Pcnt
1789945143	12.01 Volt	70 Pkt	10 Pkt	96 Pcnt
1789944843	12.01 Volt	70 Pkt	20 Pkt	96 Pcnt
1789944543	12.01 Volt	70 Pkt	20 Pkt	96 Pcnt
1789944243	12.09 Volt	70 Pkt	20 Pkt	96 Pcnt
1789943943	12.09 Volt	70 Pkt	20 Pkt	97 Pcnt
1789943643	12.01 Volt	80 Pkt	20 Pkt	98 Pcnt
1789943343	12.01 Volt	80 Pkt	10 Pkt	98 Pcnt
1789943043	12.01 Volt	80 Pkt	20 Pkt	98 Pcnt
1789942744	12.09 Volt	70 Pkt	20 Pkt	98 Pcnt
1789942443	12.09 Volt	80 Pkt	20 Pkt	98 Pcnt
1789942143	12.09 Volt	80 Pkt	20 Pkt	98 Pcnt
1789941844	12.09 Volt	80 Pkt	20 Pkt	97 Pcnt
1789941544	12.09 Volt	70 Pkt	10 Pkt	98 Pcnt
1789941244	12.09 Volt	70 Pkt	10 Pkt	98 Pcnt
1789940944	11.93 Volt	70 Pkt	10 Pkt	98 Pcnt
1789940644	12.09 Volt	70 Pkt	10 Pkt	98 Pcnt
1789940344	12.09 Volt	70 Pkt	10 Pkt	97 Pcnt
1789940044	12.09 Volt	70 Pkt	10 Pkt	95 Pcnt
1789939744	12.09 Volt	60 Pkt	10 Pkt	95 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)