IR4BA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR4BA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10m*	Dg10m*	Eff1h*	Temp*
1776636054	14.18 Volt	28 Pkt	11 Pkt	44 Pcnt	14.5 C
1776635755	14.18 Volt	38 Pkt	12 Pkt	46 Pcnt	14.5 C
1776635754	14.18 Volt	38 Pkt	12 Pkt	46 Pcnt	14.5 C
1776635454	14.18 Volt	37 Pkt	19 Pkt	47 Pcnt	14.5 C
1776635155	14.18 Volt	34 Pkt	13 Pkt	46 Pcnt	14.5 C
1776635154	14.18 Volt	34 Pkt	13 Pkt	46 Pcnt	14.5 C
1776634854	14.18 Volt	30 Pkt	13 Pkt	46 Pcnt	14.5 C
1776634555	14.18 Volt	31 Pkt	12 Pkt	45 Pcnt	15 C
1776634554	14.18 Volt	31 Pkt	12 Pkt	45 Pcnt	15 C
1776634254	14.18 Volt	44 Pkt	14 Pkt	45 Pcnt	15 C
1776633955	14.18 Volt	34 Pkt	11 Pkt	44 Pcnt	15 C
1776633954	14.18 Volt	34 Pkt	11 Pkt	44 Pcnt	15 C
1776633654	13.8 Volt	25 Pkt	9 Pkt	44 Pcnt	15 C
1776633355	14.18 Volt	31 Pkt	13 Pkt	44 Pcnt	15 C
1776633354	14.18 Volt	31 Pkt	13 Pkt	44 Pcnt	15 C
1776633054	13.65 Volt	35 Pkt	11 Pkt	44 Pcnt	15 C
1776632755	13.95 Volt	36 Pkt	13 Pkt	44 Pcnt	15 C
1776632754	13.95 Volt	36 Pkt	13 Pkt	44 Pcnt	15 C
1776632454	13.65 Volt	40 Pkt	16 Pkt	42 Pcnt	15 C
1776632155	14.18 Volt	37 Pkt	16 Pkt	42 Pcnt	15 C
1776632154	14.18 Volt	37 Pkt	16 Pkt	42 Pcnt	15 C
1776631854	14.18 Volt	31 Pkt	17 Pkt	40 Pcnt	15 C
1776631556	14.18 Volt	38 Pkt	18 Pkt	41 Pcnt	15 C
1776631555	14.18 Volt	38 Pkt	18 Pkt	41 Pcnt	15 C
1776631254	14.18 Volt	33 Pkt	14 Pkt	40 Pcnt	15 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Dg10m: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)