IQ4SC Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ4SC. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1765542098	76 Pkt	520 Pkt	2 Pkt	1.76 Pcnt	47 Pcnt
1765541798	78 Pkt	550 Pkt	2 Pkt	1.76 Pcnt	48 Pcnt
1765541197	71 Pkt	570 Pkt	2 Pkt	1.76 Pcnt	50 Pcnt
1765540897	73 Pkt	600 Pkt	2 Pkt	1.76 Pcnt	51 Pcnt
1765540296	81 Pkt	630 Pkt	2 Pkt	1.76 Pcnt	53 Pcnt
1765540003	82 Pkt	660 Pkt	2 Pkt	1.76 Pcnt	56 Pcnt
1765539696	101 Pkt	680 Pkt	2 Pkt	1.76 Pcnt	57 Pcnt
1765539395	97 Pkt	680 Pkt	2 Pkt	1.76 Pcnt	57 Pcnt
1765539095	92 Pkt	680 Pkt	2 Pkt	1.76 Pcnt	59 Pcnt
1765538795	103 Pkt	690 Pkt	2 Pkt	1.76 Pcnt	60 Pcnt
1765538495	94 Pkt	680 Pkt	2 Pkt	1.76 Pcnt	60 Pcnt
1765538194	95 Pkt	690 Pkt	2 Pkt	1.76 Pcnt	61 Pcnt
1765537894	129 Pkt	710 Pkt	2 Pkt	1.76 Pcnt	61 Pcnt
1765537594	121 Pkt	710 Pkt	2 Pkt	1.76 Pcnt	60 Pcnt
1765537293	95 Pkt	700 Pkt	2 Pkt	1.76 Pcnt	60 Pcnt
1765536993	110 Pkt	690 Pkt	2 Pkt	1.76 Pcnt	60 Pcnt
1765536693	120 Pkt	680 Pkt	2 Pkt	1.76 Pcnt	59 Pcnt
1765536393	113 Pkt	660 Pkt	2 Pkt	1.76 Pcnt	58 Pcnt
1765536092	102 Pkt	640 Pkt	3 Pkt	1.76 Pcnt	58 Pcnt
1765535792	104 Pkt	620 Pkt	5 Pkt	1.76 Pcnt	57 Pcnt
1765535492	95 Pkt	610 Pkt	4 Pkt	1.76 Pcnt	56 Pcnt
1765535213	101 Pkt	610 Pkt	4 Pkt	1.76 Pcnt	55 Pcnt
1765534891	119 Pkt	630 Pkt	4 Pkt	1.76 Pcnt	55 Pcnt
1765534591	119 Pkt	620 Pkt	5 Pkt	1.76 Pcnt	54 Pcnt
1765534291	107 Pkt	590 Pkt	4 Pkt	1.76 Pcnt	54 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)