DM2HEY-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM2HEY-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1787590123	13.51 Volt	0 Pkt	0 Pkt	3 Pcnt
1787589223	13.51 Volt	0 Pkt	0 Pkt	3 Pcnt
1787588323	13.51 Volt	0 Pkt	0 Pkt	3 Pcnt
1787587423	13.51 Volt	0 Pkt	0 Pkt	5 Pcnt
1787586523	13.51 Volt	0 Pkt	0 Pkt	6 Pcnt
1787585623	13.51 Volt	0 Pkt	0 Pkt	6 Pcnt
1787584723	13.51 Volt	0 Pkt	0 Pkt	9 Pcnt
1787583823	13.51 Volt	10 Pkt	0 Pkt	11 Pcnt
1787582923	13.51 Volt	10 Pkt	0 Pkt	11 Pcnt
1787582023	13.51 Volt	10 Pkt	10 Pkt	13 Pcnt
1787581123	13.51 Volt	10 Pkt	0 Pkt	12 Pcnt
1787580223	13.51 Volt	10 Pkt	0 Pkt	8 Pcnt
1787579323	13.51 Volt	10 Pkt	0 Pkt	8 Pcnt
1787578423	13.51 Volt	10 Pkt	0 Pkt	8 Pcnt
1787577523	13.51 Volt	10 Pkt	0 Pkt	9 Pcnt
1787576623	13.51 Volt	10 Pkt	0 Pkt	10 Pcnt
1787575723	13.51 Volt	10 Pkt	0 Pkt	11 Pcnt
1787574823	13.51 Volt	0 Pkt	0 Pkt	7 Pcnt
1787573923	13.51 Volt	10 Pkt	0 Pkt	10 Pcnt
1787573023	13.51 Volt	0 Pkt	0 Pkt	8 Pcnt
1787541524	13.51 Volt	90 Pkt	50 Pkt	91 Pcnt
1787540624	13.51 Volt	80 Pkt	40 Pkt	86 Pcnt
1787454227	13.51 Volt	20 Pkt	20 Pkt	36 Pcnt
1787453327	13.51 Volt	40 Pkt	20 Pkt	56 Pcnt
1787452427	13.51 Volt	60 Pkt	40 Pkt	84 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)