YO4ISC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO4ISC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Text*	Value2*	Value3*	Value4*	Value5*
1776678637	20 °C	0	0	0	0
1776678037	19.3 °C	0	0	0	0
1776677436	20 °C	0	0	0	0
1776676837	19.2 °C	0	0	0	0
1776676237	19.9 °C	0	0	0	0
1776675637	17.4 °C	0	0	0	0
1776675038	16.4 °C	0	0	0	0
1776674438	16.8 °C	0	0	0	0
1776673837	17.1 °C	0	0	0	0
1776673238	18.9 °C	0	0	0	0
1776672638	18.8 °C	0	0	0	0
1776672043	17.2 °C	0	0	0	0
1776671437	15.9 °C	0	0	0	0
1776670837	16.3 °C	0	0	0	0
1776670236	16.2 °C	0	0	0	0
1776669637	16.6 °C	0	0	0	0
1776669037	16.2 °C	0	0	0	0
1776668436	15.1 °C	0	0	0	0
1776667837	14 °C	0	0	0	0
1776667237	13.3 °C	0	0	0	0
1776666636	12.8 °C	0	0	0	0
1776666037	12.3 °C	0	0	0	0
1776665437	12.1 °C	0	0	0	0
1776664836	12 °C	0	0	0	0
1776664237	12.1 °C	0	0	0	0

*Used Equation Coefficients:

Text: 0, 1, -100

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)