EL-EA1FPN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-EA1FPN. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1765561029	0 RX Erlang	0.84 TX Erlang	0 RXcount/10m	27 TXcount/10m
1765560429	0 RX Erlang	0.78 TX Erlang	0 RXcount/10m	17 TXcount/10m
1765559828	0 RX Erlang	0.84 TX Erlang	0 RXcount/10m	24 TXcount/10m
1765559228	0 RX Erlang	0.87 TX Erlang	0 RXcount/10m	22 TXcount/10m
1765558628	0 RX Erlang	0.76 TX Erlang	0 RXcount/10m	33 TXcount/10m
1765558027	0 RX Erlang	0.59 TX Erlang	0 RXcount/10m	56 TXcount/10m
1765557427	0 RX Erlang	0.59 TX Erlang	0 RXcount/10m	85 TXcount/10m
1765556827	0 RX Erlang	0.53 TX Erlang	0 RXcount/10m	64 TXcount/10m
1765556227	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	3 TXcount/10m
1765555626	0 RX Erlang	0.84 TX Erlang	0 RXcount/10m	29 TXcount/10m
1765555026	0 RX Erlang	0.79 TX Erlang	0 RXcount/10m	22 TXcount/10m
1765554426	0 RX Erlang	0.79 TX Erlang	0 RXcount/10m	22 TXcount/10m
1765553825	0 RX Erlang	0.7 TX Erlang	0 RXcount/10m	21 TXcount/10m
1765553225	0 RX Erlang	0.72 TX Erlang	0 RXcount/10m	27 TXcount/10m
1765552625	0 RX Erlang	0.82 TX Erlang	0 RXcount/10m	23 TXcount/10m
1765551424	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1765550824	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765550224	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765549023	0 RX Erlang	0.12 TX Erlang	0 RXcount/10m	4 TXcount/10m
1765548423	0 RX Erlang	0.74 TX Erlang	0 RXcount/10m	24 TXcount/10m
1765547822	0 RX Erlang	0.89 TX Erlang	0 RXcount/10m	12 TXcount/10m
1765547222	0 RX Erlang	0.87 TX Erlang	0 RXcount/10m	18 TXcount/10m
1765546622	0 RX Erlang	0.34 TX Erlang	0 RXcount/10m	4 TXcount/10m
1765546021	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765545421	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)