DH3CW-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DH3CW-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1776694964	986.7 hPa	23.1 C deg	1016.1 hPa	0 C deg
1776693151	986.3 hPa	25 C deg	1015.5 hPa	0 C deg
1776656845	985.4 hPa	14.5 C deg	1015.7 hPa	0 C deg
1776655035	985.5 hPa	14.1 C deg	1015.8 hPa	0 C deg
1776653215	985.9 hPa	13.9 C deg	1016.2 hPa	0 C deg
1776651401	986.2 hPa	14 C deg	1016.6 hPa	0 C deg
1776649587	986.4 hPa	13.9 C deg	1016.8 hPa	0 C deg
1776647771	986.5 hPa	14.1 C deg	1016.8 hPa	0 C deg
1776645957	986.6 hPa	14.4 C deg	1016.9 hPa	0 C deg
1776644140	986.8 hPa	14.6 C deg	1017.1 hPa	0 C deg
1776642329	987.2 hPa	14.9 C deg	1017.5 hPa	0 C deg
1776640511	987.2 hPa	15.1 C deg	1017.5 hPa	0 C deg
1776638698	987.3 hPa	15.1 C deg	1017.5 hPa	0 C deg
1776636888	987.1 hPa	15.2 C deg	1017.3 hPa	0 C deg
1776635067	987.1 hPa	15.7 C deg	1017.3 hPa	0 C deg
1776633251	987.2 hPa	16 C deg	1017.4 hPa	0 C deg
1776631437	987.2 hPa	16.3 C deg	1017.3 hPa	0 C deg
1776629623	987.4 hPa	16.6 C deg	1017.5 hPa	0 C deg
1776627806	987.6 hPa	17.1 C deg	1017.7 hPa	0 C deg
1776625990	987.5 hPa	17.5 C deg	1017.5 hPa	0 C deg
1776624173	987.2 hPa	18 C deg	1017.2 hPa	0 C deg
1776622358	986.6 hPa	18.9 C deg	1016.4 hPa	0 C deg
1776620545	986.1 hPa	19.5 C deg	1015.8 hPa	0 C deg
1776618733	985.7 hPa	20.4 C deg	1015.4 hPa	0 C deg
1776616926	985.5 hPa	21.9 C deg	1015 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)