NF5T-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NF5T-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1753495209	13.35 Volt	30 Pkt	20 Pkt	20 Pcnt
1753495208	13.35 Volt	30 Pkt	20 Pkt	20 Pcnt
1753488008	13.35 Volt	10 Pkt	10 Pkt	13 Pcnt
1753484408	13.35 Volt	30 Pkt	20 Pkt	20 Pcnt
1753480808	13.35 Volt	10 Pkt	10 Pkt	12 Pcnt
1753477208	13.35 Volt	10 Pkt	10 Pkt	12 Pcnt
1753473608	13.35 Volt	10 Pkt	10 Pkt	15 Pcnt
1753466409	13.35 Volt	20 Pkt	10 Pkt	19 Pcnt
1753462809	13.35 Volt	20 Pkt	20 Pkt	15 Pcnt
1753459209	13.35 Volt	10 Pkt	10 Pkt	9 Pcnt
1753455609	13.35 Volt	20 Pkt	10 Pkt	7 Pcnt
1753452009	13.35 Volt	30 Pkt	10 Pkt	9 Pcnt
1753448409	13.35 Volt	20 Pkt	10 Pkt	8 Pcnt
1753444809	13.35 Volt	30 Pkt	20 Pkt	12 Pcnt
1753426810	13.35 Volt	50 Pkt	40 Pkt	22 Pcnt
1753423234	13.35 Volt	30 Pkt	10 Pkt	13 Pcnt
1753419610	13.35 Volt	20 Pkt	10 Pkt	13 Pcnt
1753416010	13.35 Volt	20 Pkt	10 Pkt	13 Pcnt
1753412410	13.35 Volt	10 Pkt	10 Pkt	10 Pcnt
1753408810	13.35 Volt	20 Pkt	20 Pkt	16 Pcnt
1753390811	13.35 Volt	10 Pkt	10 Pkt	20 Pcnt
1753387211	13.35 Volt	10 Pkt	10 Pkt	14 Pcnt
1753383611	13.35 Volt	10 Pkt	10 Pkt	16 Pcnt
1753380011	13.35 Volt	10 Pkt	10 Pkt	12 Pcnt
1753376411	13.35 Volt	10 Pkt	10 Pkt	14 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)