LU5SBL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU5SBL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RSSI*	Voltage*
1773270207	25 Pkt	31 dBm	13.64 V
1773269277	28 Pkt	31 dBm	13.66 V
1773268349	19 Pkt	31 dBm	13.66 V
1773267421	26 Pkt	31 dBm	13.66 V
1773266492	26 Pkt	31 dBm	13.64 V
1773265563	26 Pkt	31 dBm	13.66 V
1773264634	17 Pkt	31 dBm	13.66 V
1773263706	23 Pkt	31 dBm	13.66 V
1773262777	20 Pkt	31 dBm	13.66 V
1773261849	21 Pkt	31 dBm	13.66 V
1773260921	15 Pkt	31 dBm	13.66 V
1773259992	19 Pkt	31 dBm	13.66 V
1773259064	21 Pkt	31 dBm	13.66 V
1773258135	26 Pkt	31 dBm	13.64 V
1773257206	25 Pkt	31 dBm	13.66 V
1773256276	15 Pkt	31 dBm	13.66 V
1773255348	25 Pkt	31 dBm	13.66 V
1773254419	19 Pkt	31 dBm	13.66 V
1773253490	22 Pkt	31 dBm	13.64 V
1773252562	11 Pkt	31 dBm	13.66 V
1773251634	24 Pkt	31 dBm	13.64 V
1773250706	17 Pkt	31 dBm	13.66 V
1773249777	19 Pkt	31 dBm	13.66 V
1773248854	8 Pkt	31 dBm	13.66 V
1773247926	12 Pkt	31 dBm	13.66 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)