AI5TX-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AI5TX-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1765465378	12.68 Volt	110 Pkt	40 Pkt	39 Pcnt
1765458179	12.68 Volt	200 Pkt	80 Pkt	59 Pcnt
1765454579	12.68 Volt	170 Pkt	60 Pkt	58 Pcnt
1765450979	12.68 Volt	160 Pkt	50 Pkt	57 Pcnt
1765447379	12.68 Volt	170 Pkt	60 Pkt	61 Pcnt
1765443779	12.6 Volt	180 Pkt	50 Pkt	59 Pcnt
1765440179	12.68 Volt	140 Pkt	60 Pkt	51 Pcnt
1765436579	12.68 Volt	180 Pkt	60 Pkt	60 Pcnt
1765432979	12.68 Volt	120 Pkt	40 Pkt	53 Pcnt
1765429379	12.68 Volt	120 Pkt	50 Pkt	48 Pcnt
1765425779	12.68 Volt	110 Pkt	40 Pkt	49 Pcnt
1765422179	12.68 Volt	90 Pkt	50 Pkt	37 Pcnt
1765418579	12.68 Volt	70 Pkt	40 Pkt	36 Pcnt
1765411380	12.68 Volt	100 Pkt	40 Pkt	46 Pcnt
1765407780	12.68 Volt	110 Pkt	40 Pkt	43 Pcnt
1765404180	12.68 Volt	120 Pkt	40 Pkt	45 Pcnt
1765400580	12.68 Volt	80 Pkt	40 Pkt	39 Pcnt
1765396980	12.68 Volt	80 Pkt	40 Pkt	37 Pcnt
1765393380	12.68 Volt	80 Pkt	50 Pkt	37 Pcnt
1765389780	12.68 Volt	70 Pkt	40 Pkt	35 Pcnt
1765386180	12.68 Volt	80 Pkt	40 Pkt	33 Pcnt
1765382580	12.68 Volt	80 Pkt	50 Pkt	38 Pcnt
1765371780	12.68 Volt	110 Pkt	60 Pkt	46 Pcnt
1765364581	12.68 Volt	140 Pkt	60 Pkt	57 Pcnt
1765360981	12.68 Volt	160 Pkt	60 Pkt	59 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)