VK2OB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2OB. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Debug*	ShkTmp*	ShkDP*	CPUtmp*	Shk%H*
1776685900	62 Counts	20.2 degC.	11.4 degC	37.63 degC	57 %
1776685601	61 Counts	20.2 degC.	11.4 degC	37.3 degC	57 %
1776685302	60 Counts	20.2 degC.	11.4 degC	37.3 degC	57 %
1776685004	59 Counts	20.2 degC.	11.4 degC	37.3 degC	57 %
1776684705	58 Counts	20.2 degC.	11.4 degC	37.3 degC	57 %
1776684406	57 Counts	20.2 degC.	11.4 degC	37.3 degC	57 %
1776684106	56 Counts	20.2 degC.	11.4 degC	37.3 degC	57 %
1776683800	55 Counts	20.2 degC.	11.4 degC	36.63 degC	56.5 %
1776683503	54 Counts	20.2 degC.	11.4 degC	37.63 degC	56.5 %
1776683202	53 Counts	20.2 degC.	11.4 degC	37.3 degC	56.5 %
1776682903	52 Counts	20.2 degC.	11.4 degC	36.63 degC	56.5 %
1776682603	51 Counts	20.2 degC.	11.4 degC	37.3 degC	56.5 %
1776682005	49 Counts	20.2 degC.	11.2 degC	37.63 degC	56.5 %
1776681706	48 Counts	20.2 degC.	11.4 degC	37.63 degC	56.5 %
1776681408	47 Counts	20.2 degC.	11.2 degC	37.3 degC	56.5 %
1776681109	46 Counts	20.2 degC.	11.2 degC	37.3 degC	56.5 %
1776680809	45 Counts	20.2 degC.	11.2 degC	37.63 degC	56.5 %
1776680510	44 Counts	20.2 degC.	11.2 degC	37.63 degC	56.5 %
1776680211	43 Counts	20.2 degC.	11.2 degC	37.63 degC	56.5 %
1776679912	42 Counts	20 degC.	11.2 degC	37.3 degC	56.5 %
1776679613	41 Counts	20.2 degC.	11.2 degC	37.63 degC	56.5 %
1776679315	40 Counts	20.2 degC.	11.2 degC	37.63 degC	56.5 %
1776678717	38 Counts	20.2 degC.	11.2 degC	37.3 degC	56.5 %
1776678417	37 Counts	20.2 degC.	11.2 degC	37.63 degC	56 %
1776678118	36 Counts	20.2 degC.	11.2 degC	36.63 degC	56 %

*Used Equation Coefficients:

Debug: 0, 1, 0

ShkTmp: 0, 0.2, 0

ShkDP: 0, 0.2, -20

CPUtmp: 0, 0.333, 0

Shk%H: 0, 0.5, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)