SP7THR-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP7THR-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1784692830	0 Count	84 Count	0 Count	0 VDC	0 VDC
1784691630	0 Count	84 Count	0 Count	0 VDC	0 VDC
1784690431	0 Count	80 Count	0 Count	0 VDC	0 VDC
1784689231	0 Count	70 Count	0 Count	0 VDC	0 VDC
1784688031	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784686831	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784685631	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784684431	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784683231	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784682030	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784680830	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784679630	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784678430	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784677230	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784676030	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784674830	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784673630	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784672430	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784671229	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784670029	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784668830	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784667630	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784666430	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784665230	0 Count	68 Count	0 Count	0 VDC	0 VDC
1784664030	0 Count	68 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)