KE8QDR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KE8QDR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1787498232	14.48 Volt	200 Pkt	60 Pkt	80 Pcnt
1787497632	14.48 Volt	200 Pkt	60 Pkt	79 Pcnt
1787496432	14.48 Volt	200 Pkt	50 Pkt	81 Pcnt
1787495832	14.48 Volt	200 Pkt	50 Pkt	80 Pcnt
1787495234	13.43 Volt	200 Pkt	50 Pkt	78 Pcnt
1787494632	14.48 Volt	210 Pkt	50 Pkt	77 Pcnt
1787494032	14.48 Volt	220 Pkt	60 Pkt	74 Pcnt
1787493432	13.95 Volt	220 Pkt	60 Pkt	72 Pcnt
1787492832	14.48 Volt	210 Pkt	60 Pkt	71 Pcnt
1787492232	14.48 Volt	220 Pkt	60 Pkt	70 Pcnt
1787491632	13.43 Volt	210 Pkt	60 Pkt	71 Pcnt
1787491032	14.48 Volt	200 Pkt	50 Pkt	69 Pcnt
1787490432	14.48 Volt	200 Pkt	50 Pkt	72 Pcnt
1787489832	14.48 Volt	190 Pkt	40 Pkt	72 Pcnt
1787489232	14.4 Volt	210 Pkt	50 Pkt	73 Pcnt
1787488632	14.25 Volt	220 Pkt	40 Pkt	77 Pcnt
1787488032	13.8 Volt	230 Pkt	40 Pkt	78 Pcnt
1787487432	13.65 Volt	260 Pkt	50 Pkt	83 Pcnt
1787486832	13.58 Volt	260 Pkt	50 Pkt	84 Pcnt
1787485632	13.5 Volt	270 Pkt	60 Pkt	85 Pcnt
1787485032	13.43 Volt	260 Pkt	50 Pkt	82 Pcnt
1787484432	13.43 Volt	240 Pkt	50 Pkt	80 Pcnt
1787483832	13.43 Volt	220 Pkt	40 Pkt	73 Pcnt
1787483233	12.15 Volt	210 Pkt	50 Pkt	70 Pcnt
1787482632	13.35 Volt	190 Pkt	40 Pkt	67 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)