AI5TX-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AI5TX-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1765529412	13.58 Volt	210 Pkt	70 Pkt	66 Pcnt
1765525812	13.58 Volt	220 Pkt	70 Pkt	71 Pcnt
1765522212	13.5 Volt	240 Pkt	80 Pkt	70 Pcnt
1765518612	13.58 Volt	220 Pkt	70 Pkt	69 Pcnt
1765515012	13.58 Volt	220 Pkt	80 Pkt	71 Pcnt
1765511412	13.58 Volt	210 Pkt	80 Pkt	73 Pcnt
1765507812	13.58 Volt	210 Pkt	70 Pkt	65 Pcnt
1765504212	13.65 Volt	200 Pkt	80 Pkt	70 Pcnt
1765494724	13.58 Volt	120 Pkt	70 Pkt	46 Pcnt
1765491124	13.58 Volt	120 Pkt	60 Pkt	48 Pcnt
1765483924	13.58 Volt	160 Pkt	80 Pkt	58 Pcnt
1765476725	13.65 Volt	160 Pkt	80 Pkt	56 Pcnt
1765473125	13.65 Volt	160 Pkt	80 Pkt	53 Pcnt
1765469525	13.65 Volt	200 Pkt	80 Pkt	48 Pcnt
1765465925	13.58 Volt	200 Pkt	70 Pkt	55 Pcnt
1765462325	13.58 Volt	260 Pkt	90 Pkt	64 Pcnt
1765458725	13.58 Volt	210 Pkt	80 Pkt	54 Pcnt
1765455125	13.58 Volt	180 Pkt	70 Pkt	52 Pcnt
1765451525	13.58 Volt	170 Pkt	60 Pkt	47 Pcnt
1765447925	13.58 Volt	180 Pkt	60 Pkt	51 Pcnt
1765444325	13.65 Volt	190 Pkt	60 Pkt	52 Pcnt
1765440725	13.58 Volt	190 Pkt	80 Pkt	52 Pcnt
1765437125	13.65 Volt	140 Pkt	50 Pkt	38 Pcnt
1765429925	13.65 Volt	140 Pkt	70 Pkt	40 Pcnt
1765426325	13.58 Volt	120 Pkt	60 Pkt	37 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)