IR1CH Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1CH. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1773045274	14.77 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773043474	14.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773041674	14.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773039874	14.54 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773038074	14.93 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773036274	14.77 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773034474	14.46 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773032674	14.93 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773030874	14.62 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773029974	14.93 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773025436	14.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773023636	14.14 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773021837	14.62 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773020038	14.93 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773018237	14.54 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773016438	14.38 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773012837	14.77 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773011937	14.62 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773009283	14.54 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773007483	14.85 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773005683	14.77 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773003883	14.62 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773002083	14.54 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1773000283	14.69 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1772998483	14.62 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)