DB0TAW-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0TAW-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1780540462	912.4 hPa	18.3 C deg	1006.8 hPa	11.6 C deg
1780538647	912.6 hPa	18.5 C deg	1006.9 hPa	11.2 C deg
1780537755	912.9 hPa	18.8 C deg	1007.2 hPa	11.6 C deg
1780536832	912.9 hPa	18.8 C deg	1007.2 hPa	11.6 C deg
1780535890	913.1 hPa	19 C deg	1007.3 hPa	11.6 C deg
1780535017	913.1 hPa	19 C deg	1007.3 hPa	11.6 C deg
1780533202	913.4 hPa	19.1 C deg	1007.6 hPa	11.6 C deg
1780532006	913.6 hPa	18.8 C deg	1007.9 hPa	11.8 C deg
1780531387	913.6 hPa	18.8 C deg	1007.9 hPa	11.8 C deg
1780529572	913.8 hPa	18.8 C deg	1008.2 hPa	11.6 C deg
1780528354	914.2 hPa	18.5 C deg	1008.7 hPa	11.6 C deg
1780527757	914.2 hPa	18.5 C deg	1008.7 hPa	11.6 C deg
1780526868	914.6 hPa	18.4 C deg	1009.2 hPa	11.1 C deg
1780525942	914.6 hPa	18.4 C deg	1009.2 hPa	11.1 C deg
1780524126	914.7 hPa	18.1 C deg	1009.4 hPa	11.1 C deg
1780522311	914.9 hPa	18.3 C deg	1009.5 hPa	11 C deg
1780520496	915 hPa	18.2 C deg	1009.7 hPa	11.1 C deg
1780518681	915.1 hPa	18.4 C deg	1009.7 hPa	10.9 C deg
1780518453	915.3 hPa	18.3 C deg	1009.9 hPa	11.1 C deg
1780517638	915.3 hPa	18.3 C deg	1009.9 hPa	11.1 C deg
1780516866	915.3 hPa	18.3 C deg	1009.9 hPa	11.1 C deg
1780515051	915.4 hPa	18.5 C deg	1010 hPa	11.2 C deg
1780513236	915.5 hPa	19.2 C deg	1009.8 hPa	11.6 C deg
1780511421	915.5 hPa	20.3 C deg	1009.5 hPa	12.1 C deg
1780509605	915.5 hPa	20.8 C deg	1009.3 hPa	12.4 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)