YH0AC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH0AC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1777853997	11 Pkt	-23 dBm	12.41 V
1777853672	12 Pkt	-24 dBm	12.41 V
1777853348	19 Pkt	-30 dBm	12.41 V
1777853021	24 Pkt	-24 dBm	12.41 V
1777852695	17 Pkt	-22 dBm	12.39 V
1777852370	25 Pkt	-25 dBm	12.41 V
1777852066	10 Pkt	-23 dBm	12.41 V
1777851720	14 Pkt	-26 dBm	12.41 V
1777851395	13 Pkt	-21 dBm	12.41 V
1777851070	13 Pkt	-24 dBm	12.41 V
1777850746	15 Pkt	-25 dBm	12.41 V
1777850420	14 Pkt	-20 dBm	12.41 V
1777850095	19 Pkt	-21 dBm	12.41 V
1777849770	16 Pkt	-23 dBm	12.41 V
1777849447	11 Pkt	-22 dBm	12.41 V
1777849121	12 Pkt	-26 dBm	12.41 V
1777848797	15 Pkt	-23 dBm	12.41 V
1777848471	16 Pkt	-21 dBm	12.41 V
1777848146	15 Pkt	-19 dBm	12.41 V
1777847821	8 Pkt	-20 dBm	12.41 V
1777847498	12 Pkt	-25 dBm	12.41 V
1777847175	13 Pkt	-22 dBm	12.41 V
1777847174	13 Pkt	-23 dBm	12.41 V
1777846849	11 Pkt	-25 dBm	12.41 V
1777846524	9 Pkt	-22 dBm	12.39 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)