OE7XXR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE7XXR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Efftl*	Eff1h*	Temp*
1772702957	13.8 Volt	160 Pkt	53 Pcnt	79 Pcnt	5 C
1772702657	13.8 Volt	170 Pkt	53 Pcnt	80 Pcnt	5 C
1772702357	13.8 Volt	170 Pkt	53 Pcnt	81 Pcnt	7 C
1772702057	13.8 Volt	180 Pkt	53 Pcnt	80 Pcnt	5.5 C
1772701756	13.8 Volt	180 Pkt	53 Pcnt	81 Pcnt	5 C
1772701456	13.8 Volt	180 Pkt	53 Pcnt	83 Pcnt	5 C
1772701156	13.8 Volt	180 Pkt	53 Pcnt	82 Pcnt	5 C
1772700855	13.8 Volt	190 Pkt	53 Pcnt	84 Pcnt	5 C
1772700555	13.8 Volt	190 Pkt	53 Pcnt	84 Pcnt	4.5 C
1772700255	13.8 Volt	190 Pkt	53 Pcnt	82 Pcnt	5 C
1772699954	13.8 Volt	190 Pkt	53 Pcnt	82 Pcnt	5 C
1772699654	13.8 Volt	190 Pkt	53 Pcnt	82 Pcnt	4.5 C
1772699354	13.8 Volt	180 Pkt	53 Pcnt	81 Pcnt	4 C
1772699053	13.8 Volt	180 Pkt	53 Pcnt	81 Pcnt	4 C
1772698753	13.8 Volt	170 Pkt	53 Pcnt	81 Pcnt	4 C
1772698453	13.8 Volt	180 Pkt	53 Pcnt	82 Pcnt	4 C
1772698153	13.8 Volt	180 Pkt	53 Pcnt	81 Pcnt	4.5 C
1772697852	13.8 Volt	180 Pkt	53 Pcnt	80 Pcnt	4 C
1772697552	13.8 Volt	170 Pkt	53 Pcnt	79 Pcnt	4.5 C
1772697252	13.8 Volt	180 Pkt	53 Pcnt	80 Pcnt	4.5 C
1772696951	13.8 Volt	180 Pkt	53 Pcnt	81 Pcnt	4 C
1772696651	13.8 Volt	180 Pkt	53 Pcnt	82 Pcnt	4 C
1772696367	13.8 Volt	190 Pkt	53 Pcnt	83 Pcnt	4 C
1772696051	13.8 Volt	190 Pkt	53 Pcnt	84 Pcnt	4 C
1772695750	13.8 Volt	180 Pkt	53 Pcnt	83 Pcnt	4 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Efftl: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)