IK2ZJU-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IK2ZJU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*	Batt*	Ampere Aux*
1772591436	9 Pkt/10m	0 Pkt/10m	4 Volt	0 Ampere
1772590233	15 Pkt/10m	0 Pkt/10m	3.96 Volt	0 Ampere
1772589029	12 Pkt/10m	0 Pkt/10m	3.84 Volt	-0.01 Ampere
1772587826	11 Pkt/10m	0 Pkt/10m	3.98 Volt	-0.01 Ampere
1772586622	13 Pkt/10m	0 Pkt/10m	4.02 Volt	-0.01 Ampere
1772585419	16 Pkt/10m	0 Pkt/10m	3.84 Volt	-0.01 Ampere
1772584215	8 Pkt/10m	0 Pkt/10m	3.94 Volt	0 Ampere
1772583012	16 Pkt/10m	0 Pkt/10m	3.98 Volt	0 Ampere
1772581808	15 Pkt/10m	0 Pkt/10m	3.98 Volt	0 Ampere
1772580605	9 Pkt/10m	0 Pkt/10m	3.9 Volt	0 Ampere
1772579402	17 Pkt/10m	0 Pkt/10m	3.92 Volt	0 Ampere
1772578198	22 Pkt/10m	0 Pkt/10m	3.82 Volt	0 Ampere
1772576995	15 Pkt/10m	0 Pkt/10m	3.92 Volt	0 Ampere
1772575797	16 Pkt/10m	0 Pkt/10m	3.82 Volt	0 Ampere
1772574588	20 Pkt/10m	0 Pkt/10m	3.98 Volt	0 Ampere
1772573384	11 Pkt/10m	0 Pkt/10m	4.02 Volt	0 Ampere
1772572190	10 Pkt/10m	0 Pkt/10m	4.02 Volt	-0.01 Ampere
1772570977	12 Pkt/10m	0 Pkt/10m	3.92 Volt	0 Ampere
1772569774	11 Pkt/10m	0 Pkt/10m	4.02 Volt	0 Ampere
1772567367	12 Pkt/10m	0 Pkt/10m	3.94 Volt	0 Ampere
1772566164	17 Pkt/10m	0 Pkt/10m	3.98 Volt	0 Ampere
1772564960	10 Pkt/10m	0 Pkt/10m	3.84 Volt	-0.01 Ampere
1772563757	14 Pkt/10m	0 Pkt/10m	3.86 Volt	0 Ampere
1772562553	3 Pkt/10m	0 Pkt/10m	3.92 Volt	-0.01 Ampere
1772561350	9 Pkt/10m	0 Pkt/10m	3.88 Volt	0 Ampere

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Volt Aux: 0, 0.1, 0

Ampere Aux: 0, 0.01, -1.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)