SN0PEK-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SN0PEK-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	SunElev*
1757551420	-0.02 degC	40 deg
1757550920	-0.02 degC	38.77 deg
1757550670	-0.02 degC	38.15 deg
1757550418	-0.02 degC	37.49 deg
1757547281	-0.02 degC	28.89 deg
1757233425	-0.02 degC	43.89 deg
1757228337	-0.02 degC	37.61 deg
1756995390	-0.02 degC	24.85 deg
1756994859	-0.02 degC	25.79 deg
1756994608	-0.02 degC	26.23 deg
1756994500	-0.02 degC	26.41 deg
1756993974	-0.02 degC	27.35 deg
1756993227	-0.02 degC	28.61 deg
1756992969	-0.02 degC	29.02 deg
1756992695	-0.02 degC	29.49 deg
1756992256	-0.02 degC	30.18 deg
1756991993	-0.02 degC	30.59 deg
1756990887	-0.02 degC	32.25 deg
1756990629	-0.02 degC	32.62 deg
1756990355	-0.02 degC	33 deg
1756990050	-0.02 degC	33.41 deg
1756989791	-0.02 degC	33.75 deg
1756989525	-0.02 degC	34.1 deg
1756989270	-0.02 degC	34.44 deg
1756988146	-0.02 degC	35.76 deg

*Used Equation Coefficients:

Temp: 0, 0.43, -80

Vsolar: 0, 0.1, 0

SunElev: 0, 0.3137, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)