This is the latest recevied telemetry packets stored in our database for station/object PJUFLD-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
WaterLevel*
Value2*
Value3*
Value4*
Value5*
1774174024
241.7 m
0
0
0
0
1774172170
2.6 m
0
0
0
0
1774170340
242 m
0
0
0
0
1774168461
241.8 m
0
0
0
0
1774166607
241.9 m
0
0
0
0
1774164752
242.3 m
0
0
0
0
1774162085
38.2 m
0
0
0
0
1774160015
242.2 m
0
0
0
0
1774158171
243.7 m
0
0
0
0
1774156328
243.7 m
0
0
0
0
1774154485
243.7 m
0
0
0
0
1774152642
243.7 m
0
0
0
0
1774150799
243.5 m
0
0
0
0
1774148956
243.5 m
0
0
0
0
1774147113
243.7 m
0
0
0
0
1774145270
243.5 m
0
0
0
0
1774143427
243.6 m
0
0
0
0
1774141584
243.7 m
0
0
0
0
1774139741
2.6 m
0
0
0
0
1774137898
3.1 m
0
0
0
0
1774136055
3.6 m
0
0
0
0
1774134212
3.4 m
0
0
0
0
1774132369
3 m
0
0
0
0
1774130526
2.2 m
0
0
0
0
1774127920
6 m
0
0
0
0
*Used Equation Coefficients:
WaterLevel: 0, 0.1, 200
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)