PJUMET-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1781860079	27.5 degC	82 %	1009 hPa	3 kmh	0 mm
1781858225	27.5 degC	83 %	1009 hPa	4 kmh	0 mm
1781856381	27 degC	85 %	1009 hPa	4 kmh	0.1 mm
1781854537	27 degC	88 %	1009 hPa	2 kmh	0.1 mm
1781852688	27 degC	87 %	1010 hPa	1 kmh	0.1 mm
1781811845	25 degC	93 %	1010 hPa	3 kmh	0 mm
1781810001	25 degC	93 %	1010 hPa	6 kmh	0 mm
1781808158	24 degC	98 %	1012 hPa	4 kmh	0 mm
1781806313	24 degC	98 %	1012 hPa	5 kmh	0 mm
1781804469	24 degC	98 %	1012 hPa	3 kmh	0 mm
1781802626	24 degC	98 %	1013 hPa	1 kmh	0 mm
1781800778	24 degC	99 %	1012 hPa	1 kmh	0 mm
1781798933	23.5 degC	99 %	1012 hPa	2 kmh	0 mm
1781797090	23.5 degC	99 %	1012 hPa	4 kmh	0 mm
1781795245	23.5 degC	99 %	1012 hPa	6 kmh	0.1 mm
1781793401	24 degC	100 %	1012 hPa	7 kmh	0.1 mm
1781791559	24 degC	99 %	1011 hPa	8 kmh	0.3 mm
1781783532	25 degC	93 %	1010 hPa	3 kmh	0.2 mm
1781781689	26 degC	84 %	1010 hPa	3 kmh	0.2 mm
1781779837	27.5 degC	76 %	1009 hPa	3 kmh	0 mm
1781777990	28.5 degC	70 %	1009 hPa	3 kmh	0 mm
1781776146	29.5 degC	67 %	1008 hPa	3 kmh	0 mm
1781774303	29.5 degC	66 %	1008 hPa	3 kmh	0 mm
1781772459	30 degC	64 %	1008 hPa	2 kmh	0 mm
1781770614	30.5 degC	61 %	1008 hPa	0 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)