PJUMET-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Hum*	Pres*	Wind*
1777576946	24.5 degC	97 %	1009 hPa	3 kmh
1777575097	25 degC	96 %	1009 hPa	3 kmh
1777573244	25 degC	100 %	1010 hPa	3 kmh
1777571387	25 degC	100 %	1011 hPa	3 kmh
1777569517	25 degC	100 %	1011 hPa	2 kmh
1777567651	25.5 degC	100 %	1011 hPa	1 kmh
1777565805	25.5 degC	100 %	1011 hPa	0 kmh
1777563950	25.5 degC	100 %	1011 hPa	0 kmh
1777562101	25.5 degC	100 %	1011 hPa	0 kmh
1777560236	25.5 degC	99 %	1011 hPa	1 kmh
1777558391	26 degC	99 %	1010 hPa	2 kmh
1777555692	26 degC	97 %	1010 hPa	3 kmh
1776925302	32.5 degC	61 %	1007 hPa	9 kmh
1776916889	31 degC	68 %	1009 hPa	9 kmh
1776915035	30.5 degC	70 %	1009 hPa	8 kmh
1776913172	30 degC	73 %	1009 hPa	6 kmh
1776883249	26.5 degC	87 %	1007 hPa	3 kmh
1776881392	26 degC	88 %	1008 hPa	3 kmh
1776879536	26 degC	88 %	1008 hPa	2 kmh
1776877691	26 degC	89 %	1008 hPa	2 kmh
1776840343	33.5 degC	55 %	1007 hPa	6 kmh
1776838499	33 degC	54 %	1007 hPa	4 kmh
1776836654	33 degC	55 %	1008 hPa	3 kmh
1776834808	32.5 degC	56 %	1009 hPa	3 kmh
1776832952	32 degC	58 %	1009 hPa	3 kmh

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)