PJUMET-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Hum*	Pres*	Wind*
1777576952	25.5 degC	94 %	1009 hPa	3 kmh
1777575103	25.5 degC	95 %	1009 hPa	3 kmh
1777573250	25.5 degC	95 %	1010 hPa	3 kmh
1777571392	25.5 degC	95 %	1010 hPa	4 kmh
1777567657	26 degC	94 %	1011 hPa	4 kmh
1777565812	26 degC	94 %	1011 hPa	3 kmh
1777563956	26 degC	94 %	1011 hPa	3 kmh
1777562108	26 degC	94 %	1011 hPa	3 kmh
1777560242	26.5 degC	93 %	1011 hPa	4 kmh
1777558397	26.5 degC	91 %	1010 hPa	5 kmh
1777555697	27 degC	90 %	1010 hPa	6 kmh
1776925308	31 degC	68 %	1007 hPa	6 kmh
1776916895	30 degC	70 %	1009 hPa	9 kmh
1776915041	30 degC	72 %	1009 hPa	9 kmh
1776913178	29.5 degC	75 %	1010 hPa	8 kmh
1776883255	26.5 degC	88 %	1008 hPa	3 kmh
1776881399	26.5 degC	87 %	1008 hPa	4 kmh
1776879541	26.5 degC	87 %	1008 hPa	4 kmh
1776877696	26.5 degC	86 %	1009 hPa	4 kmh
1776874580	26.5 degC	84 %	1009 hPa	4 kmh
1776840349	30.5 degC	62 %	1007 hPa	2 kmh
1776838504	30.5 degC	63 %	1007 hPa	2 kmh
1776836660	30 degC	66 %	1008 hPa	3 kmh
1776834814	30 degC	68 %	1009 hPa	4 kmh
1776832958	29.5 degC	69 %	1009 hPa	3 kmh

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)