PJUMET-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1781863788	26.5 degC	92 %	1009 hPa	5 kmh	0.2 mm
1781861943	26.5 degC	92 %	1009 hPa	4 kmh	0.2 mm
1781860099	27 degC	90 %	1009 hPa	5 kmh	0.3 mm
1781858245	27.5 degC	87 %	1009 hPa	4 kmh	0.3 mm
1781856401	28.5 degC	83 %	1009 hPa	4 kmh	0.1 mm
1781854557	29 degC	81 %	1009 hPa	3 kmh	0.1 mm
1781852712	28.5 degC	83 %	1009 hPa	6 kmh	0.3 mm
1781811865	25.5 degC	99 %	1010 hPa	2 kmh	0 mm
1781810021	25.5 degC	98 %	1010 hPa	5 kmh	0 mm
1781808178	25 degC	98 %	1011 hPa	3 kmh	0 mm
1781806334	25 degC	97 %	1011 hPa	2 kmh	0 mm
1781804489	25.5 degC	96 %	1011 hPa	1 kmh	0 mm
1781802646	25.5 degC	95 %	1011 hPa	2 kmh	0 mm
1781800797	26 degC	95 %	1011 hPa	1 kmh	0 mm
1781798954	26 degC	94 %	1011 hPa	1 kmh	0 mm
1781797110	26 degC	95 %	1012 hPa	3 kmh	0 mm
1781795266	26 degC	95 %	1012 hPa	5 kmh	0 mm
1781793421	26 degC	95 %	1011 hPa	5 kmh	0 mm
1781791578	26.5 degC	95 %	1011 hPa	4 kmh	0 mm
1781783552	26.5 degC	94 %	1009 hPa	6 kmh	0 mm
1781781709	27 degC	90 %	1009 hPa	6 kmh	0 mm
1781779856	28 degC	86 %	1009 hPa	5 kmh	0 mm
1781778014	28.5 degC	82 %	1009 hPa	3 kmh	0 mm
1781776166	28.5 degC	79 %	1008 hPa	4 kmh	0 mm
1781774322	29 degC	78 %	1008 hPa	6 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)