PJUMET-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1781519319	27.5 degC	85 %	1009 hPa	3 kmh	0 mm
1781517469	27.5 degC	84 %	1009 hPa	5 kmh	0.1 mm
1781515619	28 degC	82 %	1008 hPa	7 kmh	0.1 mm
1781513768	29 degC	78 %	1008 hPa	5 kmh	0 mm
1781511917	27 degC	86 %	1008 hPa	3 kmh	0.1 mm
1781511559	27 degC	86 %	1009 hPa	3 kmh	0.1 mm
1781509717	28 degC	80 %	1009 hPa	2 kmh	0 mm
1781507874	29.5 degC	75 %	1009 hPa	3 kmh	0 mm
1781506025	30.5 degC	70 %	1010 hPa	5 kmh	0 mm
1781504183	31 degC	67 %	1010 hPa	6 kmh	0 mm
1781475221	24.5 degC	95 %	1011 hPa	1 kmh	0 mm
1781473378	24.5 degC	96 %	1011 hPa	0 kmh	0 mm
1781471533	24.5 degC	96 %	1011 hPa	5 kmh	0 mm
1781469689	23.5 degC	100 %	1011 hPa	3 kmh	0 mm
1781467846	23.5 degC	99 %	1011 hPa	1 kmh	0.4 mm
1781465998	23.5 degC	99 %	1012 hPa	3 kmh	0.4 mm
1781464156	23.5 degC	99 %	1012 hPa	5 kmh	0.2 mm
1781462312	24 degC	99 %	1012 hPa	5 kmh	0.2 mm
1781460467	24 degC	98 %	1012 hPa	4 kmh	0.1 mm
1781458623	24.5 degC	95 %	1012 hPa	4 kmh	0.1 mm
1781456778	25 degC	93 %	1013 hPa	4 kmh	0 mm
1781454935	25 degC	95 %	1013 hPa	2 kmh	0 mm
1781453091	25.5 degC	99 %	1013 hPa	0 kmh	0.1 mm
1781451248	25.5 degC	99 %	1013 hPa	0 kmh	0.1 mm
1781449405	25.5 degC	98 %	1013 hPa	1 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)